Mining
Current Location :HOME > SOLUTIONS
Mining

The power plan developed by the Genlitec can improve operational efficiency of mining and smelting plant. The diesel generator set is often used to meet domestic consumption, engineering consumption and production consumption in the mine, which serves usually as a common unit.MINING.jpg


Product Requirements

1.Working Environment
Not more than 3000 meters above sea level;
Operate normally from -15 ℃ to 40 ℃;
Beyond this temperature range, the special unit can be used;
The overloading for 1 hour by 10% can be made per 12 hours;
 

2. Safety Measures
The unit is equipped with grounding protection and emergency shutdown button;
The unit can send sound and light alarm signals in the case of too low oil pressure, too high water temperature, too low water level, overload, startup failure, overspeed, short circuit, phase lack, too high voltage, voltage loss, low frequency, too low voltage of startup battery, too high voltage of startup battery, low oil level, etc.;
The full automatic transfer switch cabinet can be selected according to needs;
Unit / mains switch time is not more than 20 seconds and automatic shutdown is made after operation and cooling for 0-300s from the mains restoration;
 

3.Performance Guarantee
The unit uses high-end brand engines and generators, with powerful performance;
The external fuel system can be developed and the large-capacity fuel tank meets the operation for 12-24 hours;
Unit MTBF is not less than 2000 hours;
Optimal design and strong environmental adaptability;


Solutions
The external refueling water system with the stable performance, simple operation, convenient maintenance, low noise, convenient external, and other advantages can meet special needs of the mine.


Advantages of Product
Targeted complete products, data and programs meeting the use requirements;
Control system with AMF function can achieve automatic startup and shutdown;
ATS can be selected to achieve intelligent switching of unit / mains;
Stable performance and unit MTBF not less than 1000 hours;
The specific devices can be selected to achieve operating needs of high cold and high temperature regions;
The design and development can be made according to the special customer demands;

previous item: Outdoor Porjects next item: Oil Fields